DRY CHEMICAL POWDER EXTINGUISHING SYSTEM

Design Integrate System

DESIGN PROVIDES ACCORDING TO THE STANDARD NFPA17, ISO, SOLAS, FSS CODE, IMO CIRCULARS & SINGAPORE STANDARD.

This standard includes the minimum requirements to ensure that dry chemical fire extinguishing systems will function as intended throughout their life to protect life and property from fire. It is intended for the use and guidance of those design, install, test, inspect, approve, list, operate, or maintain such equipment.

Maintenance, testing and Inspection of Fire Protection System and Appliance

Maintenance, testing and inspections shall be carried out based on the guidelines developed by the Organization (Refer to MSC.1/Circ.1432 as amended, including the amendments by MSC.1/Circ.1516) and in a manner having due regard to ensuring the reliability of fire-fighting systems and appliances (FFE & LSA).

 

Table-1   Overview of maintenance, testing and inspections of main fire-fighting systems based on MSC.1/Circ.1432 and MSC.1/Circ.1516 as amended, as well as other relevant guidelines and instructions from different flag state Administrations.

 

DRY CHEMICAL POWER EXTINGUISHING SYSTEM Monthly Verification of valves and gauges, etc MSC.1/Circ.1432,
  Annually Verify pressure regulator, component, agitate DCP with N2 etc. MSC.1/Circ.1432,
  2 - Yearly Blow dry N2 through the discharge pipe, Operationally test, Verify cylinder, etc. MSC.1/Circ.1432,
  10 - Yearly Hydrostatic test or non-destructive testing of containment vessel MSC.1/Circ.1432,